Component Diagrams
The component diagrams in this section reflect the most popular setups that are currently used by Getac video customers. Different configurations are possible. If needed, please contact us at [email protected] to request any additional diagrams. VR-X20 F1 w/o LTE, 146° Front/Rear cameras, BC-02 BWC, TB-02, …
Specifications
CPU Memory Storage BlackBox Recording Connectivity Intel Atom® x7-Z8750 4 GB 256 GB Special configuration required 802.11AC 2x2 MIMO 4G LTE (optional) GPS Battery Backup I/O Interfaces Length Width Height Internal (~20 min runtime) 2x RJ45 POE 1x Ethernet 2x RJ…
Video Capture
Overview This screen is where the live feed from any cameras will be visible to the operator. There are several icons here that display different information depending on the status of the MVS . See the image below for an overview: Training Video Screen Controls The screen controls page allows for indepen…
Start/Stop Recording
Start Recording To start recording, press the center button once (single press). The following occurs once a recording has started: * The BWC will say, "recording." * The recording status LED will begin to blink red. * If enabled, any pre-recorded event will be added to the recording automatically. Notes: * T…
Login/Logout
How to Login For a User to log into the MVS , first they will need to accept the Getac EULA . This is made available to all users the first time they log into Getac Enterprise . Once that has been accepted, the EULA will never be prompted for again. Training Video Note: * Use the same credentials as…
Navigation
Introduction The Getac Mobile Video Solution (MVS), or in-car video system (ICV), typically includes: * A DVR, such as the VR-X20 or VR-X20 F1. * CU-D50 * A front-facing camera, such as the NF21-146, NF-22, or NF-42. * A backseat camera, such as the NF21-146IR * And optionally either a: * Wireless microphone …
