Specifications
CPU Memory Storage BlackBox Recording Connectivity Battery Backup Intel® Core™ i3-7100H ( Discontinued ) Intel® Core™ i5-7300HQ Intel® Core™ i7-7700HQ 4 GB (discontinued) 8 GB 16 GB 128 GB 256 GB 512 GB 1 TB 128 GB 256 GB 512 GB 1 TB 802.11AC 2x2 M…
Categorizing Assets
Overview Once a recording has been stopped, a list of Categories will appear, prompting the User to choose which most applies to the recording. Each Category will have a corresponding Retention time for how long that Asset or Asset Group will be kept on the server before it automatically purges. The Reten…
Video Capture
Overview This screen is where the live feed from any cameras will be visible to the operator. There are several icons here that display different information depending on the status of the MVS . See the image below for an overview: Training Video Screen Controls The screen controls page allows for indepen…
Login/Logout
How to Login For a User to log into the MVS , first they will need to accept the Getac EULA . This is made available to all users the first time they log into Getac Enterprise . Once that has been accepted, the EULA will never be prompted for again. Training Video Note: * Use the same credentials as…
Navigation
Introduction The Getac Mobile Video Solution (MVS), or in-car video system (ICV), typically includes: * A DVR, such as the VR-X20 or VR-X20 F1. * CU-D50 * A front-facing camera, such as the NF21-146, NF-22, or NF-42. * A backseat camera, such as the NF21-146IR * And optionally either a: * Wireless microphone …
Covert Mode
Power/Covert Mode Button This feature is utilized when discretion is needed during a recording or when the operator simply doesn't want the recording screen visible, e.g. at night. This feature turns off the following items*: * CU-D50 . * Backlight on the physical buttons. * Recording indicator light on the fron…
Start/Stop Recording
Start Recording To start recording, press the center button once (single press). The following occurs once a recording has started: * The BWC will say, "recording." * The recording status LED will begin to blink red. * If enabled, any pre-recorded event will be added to the recording automatically. Notes: * T…
