Start Recording and Mark
Start Recording To start recording, press the center button once ( single press ). The following occurs once a recording has started: * The BWC will say, " recording ." * The recording status LED will begin to blink red . * If enabled, any Pre-record ed event will be added to the recording automatical…
Power On and Standby
Power On To power on the BWC, press and hold the power button for a few seconds until the BWC says, "hello." The following occurs once the BWC is powered on: * The Battery Status LED will turn on (Green or Red depending on the percentage remaining). * The BWC will say, "hello." * If enabled, Pre-record will begi…
Covert Mode
Overview The purpose of Covert Mode is to enable the operator to use their BWC as discreetly as possible. This is usable in a variety of situations where visual or audible notifications may negatively impact the operator. Caution: It is highly recommended that users are well accustomed to the features and func…
Mute On and Off
Mute On To mute all audio being recorded, the BWC must first be recording , then the mute button must be pressed for approximately 1 second and released. The BWC will then say, " mute on ." The following occurs when a recording is muted: * Audio will no longer be recorded. * A Bookmark will be placed …
Overview
Buttons The BC-02 BWC has several physical buttons that control different actions. See the image below for an overview of the buttons: Ex. BC-02 Buttons and Functions Note: * Certain features such as mute are configurable and may not be enabled for every customer. * Consult with an administrator for more d…
