Covert Mode
Mar 05, 2024
196
Overview
The purpose of Covert Mode is to enable the operator to use their BWC as discreetly as possible. This is usable in a variety of situations where visual or audible notifications may negatively impact the operator.
Caution:
It is highly recommended that BWC users are well accustomed to the features and functions of the camera PRIOR to using Covert Mode.
Covert On
To enable Covert Mode, move the covert slider over the LEDs. The following occurs when covert mode is enabled:
- Both LEDs will no longer be visible to either the operator or any other person (visual notification).
- Both the spoken and beep notifications will be disabled (audible notification).
- Haptic feedback (vibration) will be disabled if configured to do so.
Notes:
- Haptic feedback (vibration) is configurable in the Unit Configuration Template in Getac Enterprise.
- All camera features such as, recording, mark, etc. are unaffected by entering covert mode. All button presses continue to function as normal, simply without any notifications of such.
- This mode can be enabled and disabled at any time, but cannot be disabled in the configuration.
Covert Off
To disable Covert Mode, move the covert slider over to uncover the LEDs. The following occurs when covert mode is disabled:
- Both LEDs will become visible to the operator and other persons (visual notification).
- Both the spoken and beep notifications will be enabled (audible notification).
- Haptic feedback (vibration) will be enabled if configured to do so.
Training Video
Watch the video below to see how this process works:
Chapters:
00:00-00:17 - Overview
00:17-00:37 - Covert On
00:38-00:59 - Covert Off
