You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support is available Mon-Fri from 0800 to 1700 Central Time @ (833) 820-5172 Option 2
T800 UHF RFID
print icon

Q: How do I test my RFID Tag to see if it is compatible or not? T800 UHF Snapback

 

  1. Open the RS500 Development Tool software by double-clicking on the “RS500 Development Tool.exe” file.
    i. Please check driver download page for software
  2. Press the “Scan” button to detect the COM port corresponding to the hardware.
  3. Press the “Connect” button to connect to the hardware.
  4. Under the “Inventory” tab, start an inventory by pressing the “Start” button.
    i. At this point, the “Event Log” on the right hand side of the GUI will show the stream of EPCs of the tags
  5. That are read by the Indy RS500 via the mini-guardrail antenna.
  6. Try moving the tag relative to the antenna, or introducing a new tag, and observe the change in the reads displayed in the Event Log.

Figure 2 – RS500 Tool GUI Configuration

RS500 Tool GUI Configuration

Feedback
0 out of 1 found this helpful

scroll to top icon